Filter
Top Products
6
Handlebar
EDGER SAFETY
WARNING: Inspect the area to be
edged before each use. Remove o bjects
(rocks, broken glass, nails, wire, etc.) which
can be thrown by the blade or can wrap
around the shaft.
WARNING: Blade rotates momen-
tarily after the trigger is released or engine is
turned of f.The blade can seriously cut you or
others. Allow bladeto stop before removing it
from the cut.
S Throw away blad es that are bent, warped,
cracked, broken or damaged in any other
way. Replace parts that are cracked,
chipped, or damaged before using the unit.
S Do not attempt to remove cut material nor
hold material to be cut when the engine is
running or when cutting blade is moving.
S Always keep the wheel and depth adjusting
skid in contact with the ground.
S Always push the unit slowly over the
ground. Stay alert for uneven sidewalks,
holes in the terrain, large roots, etc.
BLOWER/VACUUM SAFETY
WARNING: Inspect area before
starting unit. Remove all debris and hard ob-
jects such as rocks,glass, wire, etc. that can
ricochet, bethrown,or otherwisecauseinjury
or damage during operation.
S Donot set un iton anysurface except aclean,
hard area while engine is running. Debris
such as gravel, sand, dust, grass, etc., could
be picked up by the air intake and thrown out
through discharge opening, damaging unit,
property , or causing serious injury to
bystanders or operator .
S Never place objects inside the blower tubes,
vacuum tubes or blower outlet. Always d irect
the blowing debris away from people,
animals, glass, and solid objects such as
trees, automobiles, walls, etc. The force ofair
cancauserocks,dirt ,orsti cks t obethr o wnor
to ricochet which can hurt people o r animals,
break glass, or cause other damage.
S Never run unit without the proper
equipment attached. When using your unit
as a blower, always install blower tubes.
S Check air intake opening, blower tubes or
vacuum tubes frequently, always with
engine stopped and spark plug
disconnected. Keep vents and discharge
tubes free of debris which can accumulate
and restrict proper air flow .
S Never place any object in air intake opening
as this could restrict proper air flow andcause
damage to the unit.
S Neveruse forspreading chemicals,fertilizers,
or other substances which may contain toxic
materials.
S Toavoidspreading fire, donot usenear leaf or
brush fires, fireplaces, barbecue pits,
ashtrays, etc.
BRUSHCUTTER SAFETY
DANGER: Blade can thrust violently
away from material it does not cut. Blade
thrust can cause amputation of arms or legs.
WARNING: Donotusetrimmerhead
as a fastening device for the blade.
WARNING: The blade continues to
spin after the trigger is released or engine is
turned off. The coasting blade can throw ob-
jects or seriously cut you if accidentally
touched. Stop theblade by contacting theleft
hand side of the coasting blade with material
already cut.
WARNING: Inspect the area to be
cut before each use. Remove objects (rocks,
broken glass, nails, wire, etc.) which can be
thrown or become entangled in the blade or
trimmer line.