Filter
Top Products
46
MAINTENANCE
Opening the Service Door
Use the following steps to open the generator service door and gain
access to the inner components. Before performing any maintenance,
the fuel tank cap vent lever and engine switch should be positioned to
OFF. See page 18.
1. Position the fuel tank cap vent
lever (A) to OFF, if equipped.
See page 18.
2. Position the engine switch (B)
to OFF. See page 18.
3. Loosen the service door screw
(C).
4. Open the service door (D).
5. Expose the generator inner
components.
6. Upon completion of
maintenance, return the fuel
tank cap vent lever (A), and the
engine switch (B) to the ON
position to allow engine
operation.
A
D
C
B
ON
OFF