Filter
Top Products
35
OPERATION
Safe Operating Precautions
DC Operation
Connecting the Battery Charging Cable (included)
1. Position the SMART throttle switch
to OFF.
2. Disconnect the vehicle ground cable
from the negative (-) battery
terminal.
3. Plug the battery charging cable into
the DC receptacle. See page 19.
4. Connect the red lead of the battery charging cable to the positive (+)
battery terminal and then the black lead to negative (-) battery
terminal.
Start the generator
Do not start the vehicle while the battery charging cable is connected and
the generator is running. The vehicle’s charging system or the generator
may be damaged.
An overloaded DC circuit, excessive current draw by the battery, or a
wiring problem will trip the DC circuit fuse. If this happens, The fuse must
be replaced before the DC receptacle is operative. Replace the fuse with
one of the same size and rating (5 amp). Exceeding the current rating may
lead to alternator damage. If the DC circuit protector fuse continues to trip,
discontinue charging and see your authorized POLARIS generator
supplier.
The circuit protector does not prevent
overcharging the battery. Over charging
the battery may result in battery damage
and potential ignite if a spark is
introduced.