Filter
Top Products
53
12. Selection of second MEAS setting: [SEC. MEAS KEY]
Select whether the second distance measurement is
TRACK CONT or TRACK SHOT or MEAS CONT or MEAS SHOT.
13. Selection of Minimum angle display: [MIN UNIT ANG]
Select whether to set the minimum angle display mode to
“COARSE (5 seconds)” or “FINE (1 second)”.
14. Selection of Vertical angle style:[V.ANG. STYLE]
Select whether the 0 point for vertical angle is set to be “Z.0”, “H.0”
or “COMPAS”.
15. Selection for Automatic power-off function: [AUTO OFF]
Select the time interval (10, 20 or 30 minutes) for activating
the automatic power-off function, or select NIL,
disabling the function.
• The automatic power-off function automatically turns the power supply off after
the specified period of time (in minutes) when no operation for distance
measurement or for key entry has been performed with the angle remaining
unchanged.
16. Selection for Distance measurement automatic
power-off function: [EDM OFF]
Select the time interval (3, 5 or 10 minutes) for activating the
distance measurement automatic power-off function or select
NIL, disabling the function.
• The distance measurement automatic power-off function automatically poweroff
distance measurement after the specified period of time when no key operation
has been performed with the measured value remaining unchanged
(over about 0.1m) during measurement.
1. TRACK CONT
2 TRACKSHOT
3. MEASCONT
4. MEASSHOT
1. COARSE
2. FINE
1. Z.0
2. H.0
3. COMPAS
1. 10 MIN
2. 20 MIN
3. 30 MIN
4. NIL
1. 3 MIN
2. 5 MIN
3. 10 MIN
4. NIL