Filter
Top Products
38
• The 0% represents the horizontal 0,and +100% and -100% represent 45° up and down
slopes respectively.
• To return the screen from the slope (%) display to the 360° scale, also take above same
steps by entering mode B.
• If the slope (%) exceeds [+/-]1000%,“Out of grade range”is displayed, indicating that
the current vertical angle cannot be measured.
• When the telescope returns to a slope within slope [+/-] 1000%, the slope (%) display
returns automatically from the “Out of grade range”message to the numeric value.
5.6 Changing the horizontal angle from clockwise to
counterclockwise
Press [F5] [MODE] to enter mode B.
Press [F2] [ANG SET] to display the Angle
setting screen.
Press [F4] [ ] to move the cursor to
“3. R/L REVERSE”.
Press [F5] [SELECT] to add a minus sign (-)
to the horizontal angle value as a
counterclockwise angle.
• To return the horizontal angle from counterclockwise to clockwise, also take the above
same procedures, press [F5] [SELECT] to select the clockwise angle.
• When the counterclockwise horizontal angle is selected, the order of aiming at the
targets becomes the reverse (the right one first, then the left one) of the order for the
clockwise angle.
H.angle
H.dst.
V.dst.
92° 30’ 20”
S.FUNC ANG SET HOLD CORR MODE
MODE B 15°C S 0
1.ANGLE / %GRADE: ANGLE
2.H.ANGLE INPUT: 092°30’20”
3.R/L REVERSE: RIGHT
SELECT
ANGLE SET
1.ANGLE / %GRADE: ANGLE
2.H.ANGLE INPUT: 092°30’20”
3.R/L REVERSE: RIGHT
SELECT
ANGLE SET
H.angle
H.dst.
V.dst.
MEAS TARGET 0 SET DISP MODE
MODE A 15°C S 0
-267° 29’ 40”