Pentax R-323EX(NX) Telescope User Manual


 
49
8.4 Entering the mode for initial setting 4
Press the [POWER] key while holding [F4] key
down to access the screen for Initial setting 4.
Select the item of interest in the same way as in the mode for Initial setting 1.
8.5 Entering the mode for initial setting 5
Press the [POWER] key while holding [F5] key
down to access the screen for Initial setting 5.
Select the item of interest in the same way as in the mode for Initial setting 1.
Pressing [F2] [ ] scrolls the screen down five items; pressing [F1] [ ] scrolls it up
five items.
8.6 Setting of [date and time]
(Except the R-315EX, R-325EX,R-326EX and R-335EX)
Turn on the power while pressing the [F3] key. Then the screen showing date and time
appears.
SELECT
SET 4
1.TEMP UNIT : °C
2.PRESS.UNIT : hPa
3.DIST.UNIT : m
4.ANG.UNIT : DEG
SELECT
DATE-TIME INPUT
1.DATE : 04/12/20
2.TIME : 16:15:32
3.DAY : MON
SELECT
SET 5
1.BAUD RATE : 1200
2.DATA LENGHT : 8
3.PARITY BITS : NIL
4.STOP BITS : 1
5.SIGNAL CONTROL: ON