EN55
Reclining
Q
The angle of the backrest, leg rest
or armrest automatically changes at
times.
A
The angle automatically changes in
the following cases.
① When automatic course, stretch action or
manual operation are started.
The chair automatically reclines to the
massage position.
The angle does not change if the chair is
already reclined to the massage position
or further.
Leg rest
Q
When storing the leg rest, the leg
rests stop rotating when the leg
rest rotation lock release lever is
released while they are rotating.
A
The leg rests are designed to stop
partway for safety reasons.
◦ If this happens, rotate them to the correct
position.
②
When is pressed to end the massage.
The chair automatically returns to the
upright position.
◦Only the leg rest returns to the original
position if the massage is completed
according to the 16-minute timer.
◦If
is pressed to end the massage,
all operations immediately stop and the
angle does not automatically change.
Reclines
around
20°
Raises
around 60°
Controller
Q
The controller holder is unsteady.
A
Tighten the controller holder fixing
screw.
If the controller holder comes off, loosen
the controller holder fixing screw, place the
holder in and tighten the fixing screw again.
Controller holder
Controller holder
f
ixing screw
▶Continued on the next page
Q&A/Important
Notes