Filter
Top Products
Before Use
EN19
Fasten the pillow using
the fasteners.
● See page EN23 for guidelines
on positioning the pillow
during the massage.
Fasten the comfort cushion using
the zipper.
Fasten the pillow using
the fasteners.
●
See page EN23 for guidelines
●❶
Fasten the comfort cushion using
the zipper.
●❷
7
Pillow
Fasteners Fasteners Zipper
Comfort cushion
Fasten to the right side
Leg rest
View from
front
Fastening band
Tab
Controller cord
Controller cord
Cord-holder groove
③
③
④
②
●⑤
●⑥
When the controller stand is attached on the left side
●Run the controller cord to the left.
① Press
on the controller to turn on the power.
②
Press on the controller and hold until the leg rest has
risen as far as it will go.
・
Continue pressing until a “beep-beep-beep” sound is heard.
③ Disconnect the controller cord.
・ Hook is released by pressing on the tab on the fastening
band with your fingers.
④ Move the controller cord under the leg rest to the left side.
⑤ Fasten the controller cord.
・ Press down from the edge if it does not fit in easily.
⑥ I
nsert the tip of the fastening band into the hole.
● The controller cord is fastened to the right side prior to
leaving the factory.
Fasten the pillow and the comfort cushion.