Oregon S402022H0/S402022K0 Log Splitter User Manual


  Open as PDF
of 20
 
ASSEMBLY INSTRUCTIONS
NOTE: This log splitter was partially assembled at the factory. Refer to the drawing and parts list should it become
necessary to disassemble the unit for repair or replacement of parts.
STEP 1: Remove all the components from the shipping container.Inspect each piece for shipping damage. If any part is
damaged, contact your dealer or delivering carrier.
STEP 2: Attachthetwowheels(1)tothetankassemblywheelspindlesusingthe3/4”lightatwashers(2),3/4”NF
 slottednuts(3),1/8”x1-1/2”cotterpins(4)andthehubcaps(5).Theseitemsareinthehardwarepackage.
Tighten the slotted nuts and make sure the wheels rotate freely.
Page 7
ITEM NO. DECSRIPTION QTY.
1 Road-Speed Tire and Wheel 2
2 HardwareKit(notshown) 1
3 Tongue Assembly 1
4 Tank Assembly 1
5 Beam Lock Assembly 1
6 Beam Assembly 1
ITEM NO.. DESCRIPTION QTY.
1 Tire and Wheel 2
2 3/4” Light Flat Washer 2
3 3/4” Slotted Nut 2
4 1/8” x 1-1/2” Cotter Pin 2
5 Hub Cap 2
O/L- Obtain locally. Common fasteners available through hard-
ware and farm stores.
 previous next