Oregon S402022H0/S402022K0 Log Splitter User Manual


  Open as PDF
of 20
 
Page 8
STEP 4: Stand the beam (1) up on end. Two people may be needed for this step to ensure safety. Make sure that the
beam is stable and on a level surface.Remove the pivot pin (3) and clip pin (2) from the tank assembly.Roll the
 tongue/tankassemblyintopositionbetweenthetwotabsonthebeam(1).Slidethepivotpin(3)throughthe
aligned holes and lock in place with the clip pin (2).
ITEM NO. . DESCRIPTION QTY.
1 Beam 1
2 1/2”-3/4” R Clip Pin 1
3 Tank/Tongue Assembly 1
4 Pivot Pin 1
STEP 3:Attachthetongueassembly(5)tothetankassembly(1)usingtwo1/2”NCx4-1/2”hexcapbolts(2),two1/2”
 lockwashers(3)andtwoandtwo1/2”hexnuts(4).Tighten.
ITEM NO. DESCRIPTION
QTY.
1 Tank Assembly 1
2 1/2” NC x 4-1/2 Hex Bolt 2
3 1/2” Lock Washer 2
4 1/2” NC Hex Nut 2
5 Tongue Assembly 1
5
 previous next