Filter
Top Products
Appendix A – Broadcast Spray Calibration Tables
35
Below are some guidelines to help you calibrate your broadcast sprayer. This is a very important
step in operating the broadcast sprayer such that too much or too little chemical may be applied.
1. Using Table 1, find a table that corresponds with the chemical manufacturer’s suggested
application rate(gallons per acre, gallons per 1000 sq. ft., or gallons per 100 sq. ft.).
2. Find the application rate that is closest to the chemical manufacturer’s recommendations.
3. The speed to drive your ATV is listed below the application rates.
TABLE 1
Spray Pressure GALLONS PER ACRE – based on water at 40” spacing
Height (PSI) 1 MPH 2 MPH 3 MPH 4 MPH 5 MPH 7 MPH 10 MPH
23” 15 54.4 27.2 18.2 13.6 10.9 7.8 5.45
23” 25 70.4 35.2 23.5 17.6 14.1 10.1 7.05
23” 35 83.2 41.6 27.8 20.8 16.7 11.9 8.35
Spray Pressure GALLONS PER 1000 SQUARE FEET – based on water at 40” spacing
Height (PSI) 1 MPH 2 MPH 3 MPH 4 MPH 5 MPH 7 MPH 10 MPH
23” 15 1.25 .624 .418 .312 .250 .179 .125
23” 25 1.62 .808 .539 .404 .324 .232 .162
23” 35 1.91 .767 .638 .478 .383 .273 .192
Spray Pressure GALLONS PER 100 SQUARE FEET – based on water at 40” spacing
Height (PSI) 1 MPH 2 MPH 3 MPH 4 MPH 5 MPH 7 MPH 10 MPH
23” 15 .125 .062 .042 .031 .025 .018 .013
23” 25 .162 .081 .054 .040 .032 .023 .016
23” 35 .191 .077 .064 .048 .038 .027 .019
* Approximate flow from one nozzle
4. Use Table 2 to choose the throttle setting on your ATV.
TABLE 2
5. The coverage area can be found by dividing tank size by the application rate.
Example: 26 gallons divided by 12 gallons/acre = 2.16 acre of coverage per tank.
Speed Time required in seconds to travel a distance of:
(MPH) 100 ft. 200 ft. 300 ft.
1 68 136 205
2 34 68 102
3234568
4173451
5142841
6112334
7 9.5 19 29