Filter
Top Products
GB - 3
PRODUCT REGISTRATION
The National Mower dealer must register the
product at the time of purchase. Registering
the product will help the company process
warranty claims or contact you with the latest
service information. All claims meeting
requirements during the limited warranty
period will be honored, whether or not the
product registration card is returned. Keep a
proof of purchase if you do not register your
unit.
Customer Note: If the Dealer does not
register your product, please fill out, sign and
return the product registration card to
National Mower or go to
www.nationalmower.com on the internet.
UNAUTHORIZED REPLACEMENT
PARTS
Use only National Mower replacement parts.
Replacing any part on this vehicle with
anything other than a National Mower
authorized replacement part may adversely
affect the performance, durability, or safety of
this unit and may void the warranty. National
Mower disclaims liability for any claims or
damages, whether warranty, property
damage, personal injury or death arising out
of the use of unauthorized replacement parts.
To locate your nearest National Mower
Dealer, go to www.nationalmower.com on the
internet.
DEALER DELIVERY
Dealer should:
1. Check that all assembly and
adjustments have been properly
completed.
2. Fill out Original Purchaser Registration
Card and return the card to National
Mower.
3. Explain Turf Products Limited Warranty
Policy.
4. Explain recommended lubrication and
maintenance. Advise customer on
adjustments.
5. Instruct customer on controls and
operation of unit. Discuss and
emphasize the Safety Rules. Advise
customer to thoroughly read and
understand all operating manuals
supplied with the unit.
DISCLAIMER
reserves the right to discontinue, make
changes to, and add improvements upon its
products at any time without public notice or
obligation.The descriptions and specifications
contained in this manual were in effect at
printing. Equipment described within this
manual may be optional. Some illustrations
may not apply to your unit.
SAFETY ALERT
SYMBOL
These are safety alert
symbols. They mean:
•ATTENTION!
•YOUR SAFETY IS
INVOLVED!
When you see this
symbol:
•BECOME ALERT!
•OBEY THE MESSAGE!
SIGNAL WORDS
The safety alert symbols above and signal
words below are used on decals and in this
manual.
Read and understand all safety messages.
SAFETY
WARNING: This cutting machine is
capable of amputating hands and
feet and throwing objects. Failure to
observe the safety instructions in
the manuals and on decals could
result in serious injury or death.
Slopes are a major factor related to
loss-of-control and tip-over
accidents. Operation on all slopes
requires extra caution.Tragic
accidents can occur if the operator
is not alert to the presence of
children. Never assume that
children will remain where you last
saw them. Gasoline is extremely
flammable and the vapors are
explosive, handle with care.
Disengage attachment, stop unit
and engine, remove key, engage
parking brake, and allow moving
parts to stop before leaving
operator’s position.
OL1253
OL3900