Filter
Top Products
09
SLIM-LINE RC
11.0 Operating Instructions
Description
This SLIM-LINE RC unit is fitted with a control system that
provides either automatic or manual control of the unit. In
automatic mode the desired temperature set point is selected
and the unit will adjust the fan speed according to the difference
between the actual room temperature and the set point. When
the room temperature reaches the set point the fan will switch
off and thereafter will continue to cycle on and off to maintain
the room temperature. The temperature set point range is 15 - 35°C.
In manual mode the automatic temperature control is
overridden and any of the three fan speeds can be operated
inrespective of the water temperature in the unit. This means
that air circulation can be provided in summer for example, or
that heating performance can be controlled manually.
The unit can be controlled using the infra red remote control
handset supplied with the unit (see fig. 4) and also using
the control panel on the unit (see fig. 5). If necessary, however,
the control panel can be locked electronically to prevent
tampering once the controls have been set (see over).
The remote control hand set takes 2 AAA batteries (not supplied).
Fig. 4 Fig. 5
Controls Display
Power button Switches unit on & off
‘+/-’ button Adjust temperature set point from
15 - 35°C
Scrolls into F1, F2 or F3 manual mode
Heating
The unit will only operate in heating mode when the central
heating boiler is on, the pump is running and the system water
temperature is greater than 43°C. Ensure the boiler is on, and
set timer, boiler controls and room thermostats as
necessary.
10.011.0
22369 Slimline RC Manual:Layout 1 10/11/09 16:02 Page 10