Filter
Top Products
04
SLIM-LINE RC
5.0 Preparation
Before proceeding with the installation, unpack the carton
contents and check against the checklist below:
1. SLIM-LINE RC unit.
2. 15mm isolating valves (1 pair).
3. Instruction manual.
4. Warranty card.
5. Fixing kit (rubber mounts and cable gland).
6. Remote control handset.
6.0 Fixing
● Using the fixing dimensions (see fig. 1), mark the fixing hole
positions on the wall.
● Drill and plug the wall for No. 8 x 40mm round head wood
screws ensuring that the wall plugs are suitable for the wall
type.
● Remove the backing from the self-adhesive washers and place
on screws with adhesive side towards the point.
● Tighten the screws into the wall leaving about 9mm
projecting.
● Press adhesive washers to the wall.
● Remove outer case fixing screw at the bottom of the unit
(see fig. 2).
● Lift off outer case.
● Fit chassis on to retaining screws and tighten.
Fig. 1
22369 Slimline RC Manual:Layout 1 10/11/09 16:02 Page 5