Filter
Top Products
MVH-120GH — OPERATION AND PARTS MANUAL — REV. #03 (10/24/07) — PAGE 9
RULES FOR SAFE OPERATION
LOADING AND UNLOADING
Before lifting, make sure that equipment parts (hook and
vibration insulator) are not damaged and screws are not
loosened or lost.
ALWAYS make sure crane or lifting device has been
properly secured to the lifting bail (hook) of the equipment.
NEVER lift the equipment while the engine is running.
Use adequate lifting cable (wire or rope) of sufficient
strength.
Use one point suspension hook and lift straight upwards.
NEVER allow any person or animal to stand underneath
the equipment while lifting.
Do not to lift machine to unnecessary heights.
transporting
ALWAYS shutdown engine before transporting.
Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
Drain fuel when transporting equipment over long
distances or bad roads.
ALWAYS tie down the equipment during transport by
securing the equipment with rope.
TYPICAL
PLATE COMPACTOR
REFUELING
MAINTENANCE SAFETY
NEVER lubricate components or attempt service on a
running machine.
ALWAYS allow the machine a proper amount of time to
cool before servicing.
Keep the equipment in proper running condition.
Fix damage to the equipment immediately and always
replace broken parts.
Dispose of hazardous waste properly. Examples of
potentially hazardous waste are used motor oil, fuel and
fuel filters.
DO NOT use food or plastic containers to dispose of
hazardous waste.
DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
FUEL
FUEL