Filter
Top Products
MVH-120GH — OPERATION AND PARTS MANUAL — REV. #03 (10/24/07) — PAGE 19
Inspection and Maintenance Service Tables.
1. To make sure your plate compactor is always in good
working condition before using, carry out the maintenance
inspection in accordance with Tables 4 through 6.
Daily Service
z
Check for leakage of fuel or oil.
z
Check for loose screws including tightness. See Table 6
below (tightening torque), for retightening:
z
Remove soil and clean the bottom of compaction plate.
z
Check hydraulic pump, piping and hose for any leakage.
A loosened hydraulic hose can be a cause for leakage.
Check hydraulic hose connections with wrench applied
for tightness.
z
Check engine oil.
MVH-120GH — MAINTENANCE
KCEHCENIGNE.5ELBAT
)launaMenignEetarapesees,sliatedroF(
metI noitarepOfosruoH
leufroliofoegakaeL )yadyreve(sruoh8yrevE
sdaerhtgninetsaffossenthgiT )yadyreve(sruoh8yrevE
dnakcehclioenignE
tnemhsinelper
yreve(sruoh8yrevE
.xamdeificepsothsinelpeR()yad
)level
tnemhsinelperlioenignE
001yreveneht,sruoh02tsriftA
sruoh
gninaelcrenaelcriA sruoh05yrevE
NOITCEPSNIENIHCAM.4ELBAT
metI noitarepOfosruoH
kcehcgnitratS )yadyreve(sruoh8yrevE
swercstsolrodenesooL )yadyreve(sruoh8yrevE
strapdegamaD )yadyreve(sruoh8yrevE
gnillortnocfonoitcnuF
trapmetsys
)yadyreve(sruoh8yrevE
kaelmetsysciluardyH sruoh001yrevE
kcehcliorotarbiV sruoh003yrevE
tnemecalperliorotarbiV sruoh001yrevE
kcehcliociluardyH .srh0001yrevenehtsruoh002yrevE
kcehc)hctulc(tleb-V ruoh002yrevE
.6ELBAT
retemaiD)mc/gk.ni(EUQROTGNINETHGIT
lairetaM
mm6 mm8 mm01 mm21 mm41 mm61 mm81 mm02
T4 07 051 003 005 057 001,1 004,1 000,2
T8-6 001 052 005 008 003,1 000,2 007,2 008,3
T11 051 004 008 002,1 000,2 009,2 002,4 006,5
* )mm01(007~056)mm8(053~003)mm6(001
)munimulafositrap-retnuocesacnI(*
)dednahthgirllaeraenihcamsihthtiwesunisdaerhT(
,tlobhcaenodekramsilairetamfoytilauqdnalairetaM
.wercsdna
Inspection and other services should
always
be carried
out on solid and level ground with the engine shut down.
CAUTION
These inspection intervals are for operation under normal
conditions. Adjust your inspection intervals based on the
number of hours plate compactor is in use, and particular
working conditions.
CAUTION
Fuel piping and connections should be replaced every 2
years.
CAUTION