Filter
Top Products
INDUSTRIAL GENERATOR SETS — APPLICATION & INSTALLATION MANUAL — REV. #4 (09/07/07) — PAGE 9
IMPORTANT SAFETY INSTRUCTIONS
■
NEVER connect the generator to house wiring. This is
illegal and very dangerous. Electrical shock could occur
causing damage to the generator and bodily harm — even
death!
■
NEVER use damaged or worn cables when connecting
power tools or equipment to the generator. Make sure
power connecting cables are securely connected to the
generator’s output terminals, insufficient tightening of the
terminal connections may cause arcing and damage the
generator. Touching worn or frayed electrical cables may
cause electrical shock, which could result in severe bodily
harm or even
death!
■
NEVER touch output terminals during operation. This is
extremely dangerous.
Always stop the machine and
disconnect the battery when contact with the output
terminals is necessary.
GENERAL SAFETY
RADIATOR
2. Coolant Drain Plug - Removing the coolant drain plug
while the engine is hot will result in hot coolant to drain
out of the coolant drain plug, and could cause severe
scalding to any persons in the general area of the
generator.
3. Engine Oil Drain Plug - Removing the engine oil drain
plug while the engine is hot will result in hot oil to drain
out of the oil drain plug, and could cause severe scalding
to any persons in the general area of the generator.
1. Radiator Cap - Removing the radiator cap while the
engine is hot will result in high pressurized, boiling water
or coolant to gush out of the radiator, causing severe
scalding to any persons in the general area of the
generator.
■
DO NOT touch or open any of the components mentioned
below while the generator is running. Always allow
sufficient time for the engine and generator to cool before
performing maintenance.