Filter
Top Products
PAGE 10 — MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (03/12/13)
MP2 MASONRY SAW — RULES FOR SAFE OPERATION
Safety
■
DO NOT operate or service this
equipment before reading this entire
manual.
■
This equipment should not be operated by persons under
18 years of age.
■
NEVER operate the saw without proper
protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job.
■
NEVER operate this equipment when not
feeling well due to fatigue, illness or
taking medicine.
■
NEVER operate the saw under the
influence or drugs or alcohol.
■
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
■
Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
■
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
■
ALWAYS check the saw for loosened threads or bolts
before starting.
■
NEVER operate the saw in an explosive atmosphere where
fumes are present or near combustible materials. An
explosion or fire could result causing severe
bodily harm
or even death.
■
NEVER use fuel as a cleaning agent.
■
ALWAYS use extreme caution when
working with flammable liquids. When
refueling, stop the engine and allow it to cool.
■
NEVER
smoke
around or near the
machine. Fire or explosion could result from
fuel vapors
, or if fuel is spilled on a
hot!
engine.
■
Topping-off to filler port is dangerous, as it tends to spill fuel.
■
ALWAYS service air cleaner frequently to prevent carburetor
malfunction.
■
NEVER run the engine without the air filter. Severe engine
damage could occur. (Gasoline powered engines)
■
NEVER touch the hot exhaust
manifold, muffler or cylinder. Allow
these parts to cool before servicing
the saw.
■
The engine of this saw (
gasoline model only
) requires an
adequate free flow of cooling air. NEVER operate the saw in
any enclosed or narrow area
where free flow of the air is
restricted. If the air flow is
restricted it will cause serious
damage to the saw's engine
and may cause injury to
people. Remember the saw's
engine gives off
DEADLY
carbon monoxide gas.
■
ALWAYS stop the engine before servicing, adding fuel and
oil.
■
High Temperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with
hot!
components can cause serious burns.
■
ALWAYS refuel in a well-ventilated
area, away from sparks and open
flames.
Safety - Gasoline Powered Engines
WARNING - READ THIS MANUAL
Failure to follow instructions in this manual may lead to
serious injury or even death! This equipment is to be
operated by trained and qualified personnel only! This
equipment is for industrial use only.
The following safety guidelines should always be used
when operating the MP2 Masonry Saw. Unless otherwise
noted, these guidelines refer to saws with gasoline
powered engines.