HDA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #9 (07/02/10) — PAGE 13
SPECIFICATIONS (TROWEL)
NOTE:
1. Sound pressure is a weighted measure. Measured at the
operators ear position while the walk-behind trowel is
operating at full throttle on concrete in a manner most often
experienced in “
normal
” circumstances. Sound pressure
may vary depending upon the condition of the concrete.
Hearing protection is always recommended.
Figure 2. HDA-SERIES Trowel Dimensions
2. The vibration level indicated is the maximum RMS (Root
Mean Square) value obtained at the handle grip while
operating the walk-behind trowel on curing concrete in a
manner most often experienced in “
normal
” circumstances.
Values were obtained from all three axes of motion. The
values shown represent the maximum RMS value from
these measurements.
Side View
Top View
SPECIFICATIONS (TROWEL)
snoitacificepSleworTseireS-ADH.1elbaT
)kooHgnitfiL(thgieH–A )mm2.678(ni5.43
)reveLtnemegagnEthgieH–B )mm2.440,1(ni1.14
htdiW–C
)mm4.861,1(0.84
htgneL–D
)mm1.019,1(2.57
gnitarepO–thgieW .gK501/.sbl032
erusserPdnuoS bd79
noitarbiV s/m5.42(g5.2
2
)
retemaiDgniR )mc711(ni64
sedalBforebmuN 4
)s/m(MPF–deepSpiTedalB )s/m5.7(mpf874,1
)enilosaG(MPR–rotoR 521ot06
)mc(.ni–htdiWhtaP )332(84