Multiquip GAW-135H Portable Generator User Manual


 
PAGE 10 — GAW-135H DC WELDER/AC GENERATOR — OPERATION MANUAL — REV. #0 (06/23/04)
GAW-135H — RULES FOR SAFE OPERATION
ALWAYS refuel in a well-ventilated area, away from sparks
and open flames.
ALWAYS use extreme caution when working with flammable
liquids. When refueling, stop the engine and allow it to cool.
DO NOT
smoke around or near the machine. Fire or explosion
could result from fuel vapors, or if fuel is spilled on a hot
engine.
NEVER operate the generator/welder in an
explosive
atmosphere
or near combustible
materials. An explosion or fire could result
causing severe
bodily harm or even
death.
Topping-off to filler port is dangerous, as it tends to spill fuel.
Refer to the
Honda Engine Owner's Manual
for engine
technical questions or information.
NEVER use accessories or attachments, which are not
recommended by
Multiquip
for this equipment. Damage to
the equipment and/or injury to user may result.
Manufacturer does not assume responsibility for any accident
due to equipment modifications.
NEVER touch the hot exhaust manifold,
muffler or cylinder. Allow these parts to
The engine of this pump requires an adequate free flow of
cooling air.
NEVER!
operate the generator in any enclosed or
narrow area where free flow
of the air is restricted. If the
air flow is restricted it will
cause serious damage to
the generator or engine
and may cause injury to
people and property.
Remember the generator's
engine gives off DEADLY
gases.
High Temperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with
hot
components can cause serious burns.
GENERAL SAFETY
DO NOT operate or service this equipment before
reading this entire manual.
This equipment should not be operated by
persons under 18 years of age.
NEVER operate this equipment without proper
protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job.
NEVER operate this equipment when not feeling
well due to fatigue, illness or taking of any
medication.
NEVER operate this equipment under the
influence or drugs or alcohol.
Whenever necessary, replace nameplate, operation and safety
decals when they become difficult read.
ALWAYS check the generator for loosened threads or bolts
before starting.
ALWAYS wear proper respiratory (mask) hearing and eye
protection equipment when operating the generator/welder.
Failure to follow instructions in this manual may
lead to serious injury or even death! This
equipment is to be operated by trained and
qualified personnel only! This equipment is for
industrial use only.
DANGER:
The following safety guidelines should always be used when
operating the
generator/welder