Multiquip DCA-125USJ Portable Generator User Manual


 
PAGE 48 — DCA-125USJ (50 HZ) — OPERATION AND PARTS MANUAL — REV. #0 (03/11/05)
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel
mounting torque on the trailer. Be sure to use only the
fasteners matched to the cone angle of the wheel. Proper
procedure for attachment of the wheels is as follows:
1. Start all wheel lug nuts by hand.
2. Torque all lug nuts in sequence (see Figure 58). DO NOT
torque the wheel lug nuts all the way down. Tighten each
lug nut in 3 separate passes as defined by Table 15.
3. After first road use, retorque all lug nuts in sequence.
Check all wheel lug nuts periodically.
NEVER
use an pneumatic air
gun to tighten wheel lug nuts.
Figure 59. Wheel Lug Nuts
Tightening Sequence
DCA-125USJ (50 HZ)— TRAILER MAINTENANCE
NOTE
stnemeriuqeReuqroTeriT.51elbaT
eziSleehWssaPtsriF
SBL-TF
ssaPdnoceS
SBL-TF
ssaPdrihT
SBL-TF
"2152-0204-5356-05
"3
152-0204-5356-05
"4152-0206-05021-09
"5152-0206-05021-09
"6152-0206-05021-09