Filter
Top Products
19sectiOn 5 — OperatiOn
Check Fuel Level
Clean around fuel fill before removing cap to fuel.
Fill tank to approximately 1-inch below lowest portion of
neck to allow for fuel expansion. Be careful not to overfill.
NOTE: Before refueling, allow engine to cool 2 minutes.
Starting The Engine
WARNING: Always keep hands and feet clear of
equipment moving parts. Do not use a pressurized
starting fluid. Vapors are flammable.
Pull out the choke knob located on the left side of the
upper handle. See Fig. 10-3.
NOTE: Use of the choke may not be necessary if the engine
is warm or the air temperature is high.
2. Standing behind the mower, depress the blade control
handle and hold it against the upper handle.
3. Pull the starter grip lightly until resistance is felt, then pull
rapidly to overcome compression, prevent kickback, and
start engine. Repeat if necessary. See Fig. 10-3.
NOTE: Do not allow the starter grip to snap back against
the rope guide. Return it gently to prevent damage to the
starter.
4. When engine warms up, push in the choke knob. See Fig.
10-3.
Stopping The Engine
Release the blade control.
1.
2.
1.
1.