Filter
Top Products
15sectiOn 7 — service
Lift mower to access belt from underside of mower. Slide
belt off of engine pulley and around the blade. See Fig. 7-3.
Replace with new belt, working around blade. Make sure
belt is firmly seated on engine pulley while pulling from
the other side and sliding it around the transmission pulley.
Secure belt tension spring to the transmission. Reassemble
front drive cover.
4.
5.
Figure 7-3
Off-Season Storage
The following steps should be taken to prepare your lawn mower
for storage.
Clean and lubricate mower thoroughly as described in the
lubrication instructions.
Do not use a pressure washer or garden hose to clean your
unit.
Coat mower’s cutting blade with chassis grease to prevent
rusting.
Store mower in a dry, clean area. Do not store next to
corrosive materials, such as fertilizer.
When storing any type of power equipment in a poorly
ventilated or metal storage shed, care should be taken to
rust-proof the equipment. Using a light oil or silicone, coat the
equipment, especially cables and all moving parts of your lawn
mower before storage.
•
•
•
•