Filter
Top Products
12
KNOW YOUR RIDING MOWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR RIDING MOWER
Compare the illustrations with your riding mower to familiarize yourself with the locations
of various controls and ad just ments. Save this manual for future reference.
Our riding mowers conform to the applicable safety standards of the
American National Stan dards Institute.
DECK CLUTCH LEVER - Used to engage
the mower blade.
BRAKE PEDAL - Used for brak ing the riding
mower and starting the engine.
HEIGHT ADJUSTMENT LEVER - Used to
adjust mower cutting height.
IGNITION SWITCH - Used for starting and
stopping the engine.
LIFT LEVER PLUNGER - Used to re lease
height adjustment lever when chang ing its
position.
PARKING BRAKE LEVER - Locks parking
brake into brake position.
MOTION CONTROL LEVER - Selects the
speed and direction of the riding mower.
ROS “ON” POSITION
- Allows operation of
mower deck or other powered attachment
while in reverse.
THROTTLE/CHOKE CONTROL – Used for
starting and controlling engine speed.
Ignition
Switch
ROS
"ON"
Motion
Control
Lever
Throttle/
Choke
Control
Lift Lever
Plunger
Height
Adjustment
Lever
Deck Clutch
Lever
Brake Pedal
Parking
Brake Lever
33
1 532 43 61-76 WELDMENT, CHASSIS
2 532 18 01-66 BRACKET, SEAT
7 532 43 61-77 PLATE, ENGINE
8 532 43 96-14 BRACKET, CHASSIS FRONT
10 532 44 18-05 PAN, SEAT
11 532 19 93-70 BRACKET, SWITCH MOUNTING
13 532 44 20-71 COVER, FOOT REST
14 532 44 20-75 FOOTREST STRUCTURAL
15 532 44 20-69 SUPPORT, FOOT REST
16 532 43 93-95 PANEL ASM, CONTROL
18 – – – – – – ENGINE, 217807-1537-G1
(439614) (NON-CALIFORNIA)
(ORDER PARTS FROM
ENGINE MANUFACTURER)
19 532 43 68-61 KEEPER, BELT
22 532 44 17-15 DECK CLUTCH ASM
23 532 14 98-46 KNOB
24 532 41 63-58 SCREW #10 X 0.750 BOS
THREAD
25 872 14 04-24 BOLT
26 873 51 04-00 NUT 1/4-20
29 532 43 89-21 BOLT, 7/16-20 X 1.00
32 817 06 06-20 SCREW 3/8-16 X 1-1/4
33 532 12 41-81 SPRING, SEAT
34 532 12 37-40 SPRING
35 872 05 04-12 BOLT, 1/4-20 X 1 1/2
39 532 13 43-00 SPACER
40 532 12 12-48 BUSHING, NYLON SNAP
41 532 12 39-76 NUT, LOCK
42 532 17 18-52 BOLT, 5/16-18 SHOULDER
43 873 80 05-00 NUT, 5/16-18
44 532 43 66-12 SEAT
45 817 00 05-12 BOLT, 5/16-18 X 3/4
51 532 42 88-56 BRACKET
52 532 14 50-06 CLIP PUSH-IN HINGED
53 532 43 85-62 SCREW
54 532 43 64-73 DISC FRICTION
55 532 43 58-08 TORSION BODY UPPER
56 532 44 19-25 TORSION BODY LOWER
57 532 43 64-79 SPRING HELIX
59 819 18 24-11 WASHER 9/16ID X 1/2 20D11G
60 532 43 78-56 FUEL TANK ASM
62 532 40 04-14 FUEL LINE
63 532 41 41-19 PURGE LINE
64 532 12 34-87 CLAMP HOSE
65 532 43 02-19 FUEL CAP
66 532 43 66-06 FUEL TANK SUPPORT BRKT
67 532 42 17-56 SCREW #10 X 0.500
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
68 532 43 98-51 SHIELD HEAT
69 532 43 74-27 BRACKET MOUNT CABLE
70 532 44 20-68 CONSOLE CENTER
CUPHOLDER
71 532 43 78-57 THROTTLE ASM
72 532 19 51-61 STUD FASTNER
73 873 90 05-00 NUT LOCK HEX FLANGE 5/16-
18
74 873 90 04-00 NUT HEX FLANGE 1/4-20
76 877 10 08-12 PIN CLEVIS
77 876 02 02-08 PIN COTTER 1/16 X 1/2
78 532 43 70-56 BRACKET SUPPORT ROD
79 532 43 70-57 BRAKE WELDMENT
80 532 42 96-93 BRAKE PEDAL COVER
81 532 43 73-74 WELDMENT LINK CONNECTING
82 532 16 94-84 RETAINER CLIP
83 532 43 93-66 STEERING TOWER REAR
84 532 43 92-88 STEERING BOOT FRONT
85 532 43 76-60 PARKING BRAKE HANDLE
86 532 43 87-62 ACTUATOR PARKING BRAKE
87 532 16 54-92 SHOULDER BOLT
88 532 42 81-10 CROSS BRACE
89 532 42 17-56 SCREW
91 532 43 74-01 TRACK CLUTCH BRKT
92 532 18 4471 BOLT
94 874 49 05-48 BOLT
95 532 43 67-02 BRACKET CLUTCHING
96 532 44 20-73 BUMPER REAR
97 532 43 64-72 PULLEY ENGINE
98 817 49 04-08 SCREW 1/4-20 X 1/2
100 532 19 76-61 HANDLE SLIDE SEAT
101 532 19 82-00 SPRING LATCH SEAT
102 874 76 06-12 BOLT FIN HEX 3/8-16 UNC X 3/4
103 819 13 38-12 WASHER 13/32 X 2 3/8 X 12 GA
104 818 10 10-08 SCREW TORK #10-14 X 1/2
105 532 44 20-78 ENGINE COVER
106 532 43 68-34 STRAP BATTERY
107 532 44 20-74 FRONT BRUSH GUARD
108 532 43 71-68 COVER REAR TRANSAXLE
109 532 43 90-08 BRAKE HANDLE PLATE
110 532 42 21-45 CONTROL PANEL HINGE PIN
111 532 43 81-71 SHIELD, BRAKE CABLE
112 817 72 04-08 SCREW THD CUT
113 817 06 05-12 SCREW 5/16-18 X 3/4
RIDING MOWER MODEL NUMBER MC30 (96022001300)
CHASSIS
PRODUCT NUMBER 960 22 00-13