Filter
Top Products
-- 6 --
3. Holdthe vacuum inletcover openuntilup-
per vacuum tube is installed.
V
acuu
m
Inlet
Cover
Vacuum
Inlet
4. Align thetabs ontheinside ofthevacuumin-
let with the slots on the upper vacuum tube.
Tab
Slot
5. Pushthe upper vacuum tubeinto the vac-
uuminlet. Turn thetubecounterclockwise
until a click is felt to secure thetube to the
blower unit.
6. Alignslantedendoflower vacuum tubeas
shown. Push lower vacuum tube into upper
vacuum tube until the lower tube is securely
seated in the upper tube (about 7 cm).
Slanted end of
lower vacuum tube
7. When vacuum tubes are fitted together ,
locate the label onthe lower portion of the
upper tu be . Permanently assemble the two
tubes together with the supplied screw.
Upper
Vacuum
Tube
Lower
Vacuum
Tube
HOW TO CONVERT UNIT FROM
VACUUM USE TO BLOWER USE
1. Remove the elbow tube and vacuum bag
by turning the knob c ounterclockwise to
loosen the elbow tube.
2. Remove the vacuum tubes by turning the
tubes clockwise.
3. Close the vacuum inlet c over and make
sure it is latched closed.
4. Reinstall the blower tubes (see BLOWER
TUBE ASSEMBLY).
SHOULDER STRAP ADJUSTMENT
1. Hold the unit as shown with the muf fler side
facing away from your body and clothes.
2. Pass the shoulder strap over your head
and onto your right shoulder.
3. Extendyour leftarm toward therear ofthe
vacuum bag.
4. Adjust shoulder strap until the vacuum
bag/shoulder strap seam lies between
your thumb and index finger.
5. M ake sure air flows freely from the elbow
tubeintobag. If bagis kinked, theunit will
not operate properly .