Filter
Top Products
Installing cutting head
CAUTION:
Secure the cutting head firmly. Otherwise it can rotate during operation and can cause
serious injury.
Insert the cutting head into the tool with
turning it left and right alternately. Then
tighten the three screws with the hex
Cutting
head
7
wrench.
I
\
Hex
wrench
OPERATION
CAUTION:
Edges and chips of the workpiece are sharp. Wear gloves. Otherwise
it
can cause injury.
Secure the workpiece firmly. Move the tool
forward keeping the side blades flush with
the workpiece surface.
Adjusting shear blade
Adjust the side blade
L
so
that the curl of
waste
material
does
not contact the cutting
head or the workpiece. Use the hex wrench
to loosen the three screws which hold the
cutting head. Move the side blade
L
back
and forth to adjust it. Then tighten the three
screws with the hex wrench.
Center blade
I
Side blade
L
-,
Screws
&
Side blak 'Ieeve
1
Center blade
7