Filter
Top Products
Specific Safety
Rules
USE01
1~2
1.
Hold the tool firmly.
2.
Secure the workpiece firmly.
3.
Keep hands away from moving parts.
4.
Edges and chips of the workpiece are sharp. Wear gloves.
It
is also recom-
5.
Do
not
put
the tool on the chips of the workpiece. Otherwise
it
can cause
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7.
Always be sure you have a firm footing.
8.
Do
not touch the blade or the workpiece immediately after operation; they
9.
Avoid cutting electrical wires.
It
can cause serious accident by electric shock.
mended that you put on thickly bottomed shoes to prevent injury.
damage and trouble on the tool.
Be sure no one is below when using the tool
in
high locations.
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
SYMBOLS
The followings show the symbols used for tool.
v
.....................................
olts
A
....................................
amperes
Hz
....................................
herts
%
....................................
alternating current
n,
....................................
no load speed
loi
....................................
Class
II
Construction
..Jmin
...................................
revolutions or reciprocation per minute
4