Filter
Top Products
GENERAL SAFETY RULES
USA002-1
(For
All
Tools)
WARNING! Read and understand
all
instructions.
Failure
to follow all instructions listed below, may result
in
electric
shock,
fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1.
Keep your work area clean and well
lit.
Cluttered benches and dark areas invite
accidents.
2.
Do not operate power tools
in
explosive atmospheres, such as
in
the presence
of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
4.
Double Insulated tools are equipped with a polarized plug (one blade is wider
than the other.) This plug will
fit
in
a polarized outlet only one way.
If
the
plug does not
fit
fully
in
the outlet, reverse the plug. If
it
still does not
fit,
contact a qualified electrician to install a polarized outlet. Do not change
the plug
in
any way. Double insulation eliminates the need for the three
wire grounded power cord and grounded power supply system.
5.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
6.
Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
7.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug
from an outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk
of
electric shock.
8.
When operating a power tool outside, use an outdoor extension cord marked
"W-A" or "W." These cords are rated for outdoor use and reduce
the
risk
of electric shock.
Personal Safety
9.
Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use tool while tired or under the influence of drugs,
alcohol, or medication. A moment
of
inattention while operating power tools
may result in serious personal injury.
10.
Dress properly. Do not wear loose clothing
or
jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
2