Filter
Top Products
Charging
Connect the battery to the charger using the adaptor cord. Then plug
the
charger into
the
power source. The charging light will illuminate and charging will begin. When the charg-
ing light goes out
at
a
certain time, the charging
is
complete. Unplug the charger.
(Note: Refer to the table below for the charging time.)
DC122
122
Approx.
1
hour
DC121
Approx.
2
hours
I
121
I
Approx.
2
hours
I
Approx.
4
hours
I
Battery-,
i-
Ou
ti et
I
CAUTION:
Always charge the Makita battery 122 immediately after purchase.
0
Always recharge the Makita battery 122 after use.
If the Makita battery 122 has not been used for long periods, charge
it
for more than the
time specified in the table above. (Example:
If
it
has not been used for six months,
charge
it
for approx. one week.) Charging continues even after the charging light goes out.
If the battery
is
left uncharged for more than six months,
it
may become unchargeable. If
the light does not come on within five minutes after you start the charging, the battery
may be unchargeable. Ship or take the charger and the battery to your nearest Makita
Service Center or Distributor for checking.
Installing the grip
Attach the grip onto the groove in both
sides of the tool and secure with the two
screws.
Screwdriver Screwdriver