Filter
Top Products
P 4/ 8
Repair
[2] DISASSEMBLY/ASSEMBLY
[2]-1. Gear 12-31, Helical gear 47
Fig. 4
Fig. 5
Fig. 6
ASSEMBLING
(1) Assemble Helical gear 47, Gear 12-31. (Figs. 4, 5)
And mount them to Housing set (L). (Fig. 6)
Crank side of Helical gear 47
1. Face the crank side of
Helical gear 47 to the bottom.
2. Assemble two Pins 4 to
Helical gear 47 by pressing
with Arbor press.
3. Facing the notch side of Pin 6
to top, pass it through Washer 6
into Helical gear 47.
5. Assemble Helical gear 47 with
fitting the notch of Pin 6 on the Rib
of Housing set (L).
Notch on Pin 6
Helical gear 47
DC Motor
Rib
Washer 6
Housing set (L)
Notch
Pin 6
Pin 4
(2pcs.)
Fig. 7
(2) Assemble Protector to housing set. (Center right in Fig. 2)
(3) Mount Crank complete. (Fig. 7)
(4) Mount Shear blade assembly and Under cover. See Figs. 10, 11 in “[3]-3. Shear Blade Assembly”.
Dust guard
6. Mount Crank complete and Dust guard.
for UH200D
for UM164D
Crank complete
<Note>
Crank complete has an interchangeability between UM164D
cordless grass shear and UH200D cordless hedge trimmer by
reversing as illustrated below.
In case of UH200D, engage this side with Shear blade assembly.
4. Pass Pin 6 through Gear 12-31
and two Washers 6 as drawn below,
then set them in place in Housing L.
Pin 6
Washer 6
Washer 6
Gear 12-31