Filter
Top Products
P 8/ 8
Wiring diagram
Fig. D-3
Noise suppressor
(if used)
Motor housing
complete
Lead wire
holder
Switch
Field
Power supply
cord
See the drawing
on the right in Fig. D-2.
Line filter (if used)
Set Line filter with Field lead wires
between Lead wire holders.
1. Pass Field lead wires through Line filter
and wind them one turn and pass them
again as shown below.
2. Winded Filed lead wires have to be located on
the Motor housing complete side.
Line filter
Handle cover
Field side
Field lead wires
Motor housing complete
Winded Field
lead wires