Filter
Top Products
P 3/ 8
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Fan Section
DISASSEMBLING
Disassemble Fan 110 as drawn in Fig. 2.
Assemble Fan Section by reversing the disassembly procedure. Refer to Fig. 2.
Note: Align the hole on Set plate with the protrusion on Fan cover, and insert Set plate by hand, then push it
with a small screwdriver until it stops.
Refer to the drawing on the top right in Fig. 2.
Fig. 2
ASSEMBLING
Fan cover
Fan 110
M5-8 Hex nut
Flat washer 5
Flat washer 8
1. Remove Nozzle.
Nozzle
3. Unscrew five 4x18 Tapping screws
and remove Fan cover.
4. Remove M5-8 Hex nut by turning it
counterclockwise with an impact driver while
holding Fan 110 firmly with a gloved hand.
5. Remove Flat washer 5, Fan 110 and Flat washer 8.
Set plate
Fan cover
2. Remove Set plate by prying it off with
a small slotted screwdriver.