Filter
Top Products
P 4/ 8
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Motor Section
DISASSEMBLING
(1) Remove Carbon brush as drawn in Fig. 3.
(2) Disassemble Fan section as drawn in Fig. 2.
(3) Disassemble Armature as drawn in Fig. 4.
Fig. 3
Fig. 4
Flat washer 8
Armature
Fan housing
complete
1. Unscrew four 4x35 Tapping
screws and disassemble Fan
housing complete.
2. Remove Flat washer 8 from
Armature shaft.
3. Remove Armature from
Motor housing.
Carbon brush