Makita RBC310 Trimmer User Manual


 
ASS
EM
B LY
IN
STR
U
CTI
0
N
S
1.
Assembly
of
engine and pipe case
For RBC230
I
RBC261
I
RBC311
Remove the protector at the end of the pipe case.
Insert the pipe case into the holder case being sure
to match the splines of the inner shaft to those
inside the holder case.
Match the hole in the pipe case to the hole in the
holder case and fasten the pipe case to the engine
with damper bolt, wave washer and washer.
(Tightening torque:
70
~
100 kg.cm;
5
~ 7
ft.lbs)
CAUTION
:
Securely tighten the damper bolt, which
is
one of
the important parts mating the engine and machine
body.
For RBC260 and RBC310
Install the pipe case (the end
with
circular metal
housing) over the clutch assembly and fix with four
socket head bolts and fix tightly with hex wrench.
2.
Mounting of handle
For RBC230
I
RBC261
I
RBC311
As
shown at right, tighten the loop handle with
three socket head bolts.
Mount the handle
so
that the throttle wire guide
will he oriented to the right, as viewed from the
engine side.
The standard position of the handle
is
200
to 250
mm
(7-718”
~
9-718”) from the hanger. Position
the handle according to a worker’s stature and
working conditions.
171
a0
141
151
161
11
1
Holder case
121
Hole
131
Pipe
case
(41
Washer
151
Wave washer
161
Damper bolt
171
Hole
Ill
Pipe case
121
Hex wrench
131
Socket head
bolt
5