Makita RBC310 Trimmer User Manual


 
8.
Set the spool in the housing
so
that the projections
on the gear plate fit into the notches of the
spool.
9.
Align the small holes
on
the cover with the eyelets
in the housing and install the cover over the housing
so
that the projections on the housing fit into the
notches on the cover.
10.
Re-install the knob and tighten
it
securely by turning
in the opposite direction of the arrow engraved on
the knob.
(1
I
Notch
12)
Projection
(1
1
Hole
(2)
Cover
(31
Notch
(41
Projection
(51
Eyelet
13