Filter
Top Products
15
(1) AC APPLICATION
(a) Check the pilot lamp for proper voltage.
This generator is thoroughly tested and
adjusted in the factory. If the generator
does not produce the specified voltage,
consult your nearest Makita factory or
authorized service center.
(b) Turn off the switch (es) of the electrical
appliance (s) before connecting to the
generator.
(c) Insert the plug (s) of the electrical appli-
ance(s) into the receptacle.
Check the amperage of the receptacles
used referring to
TABLE 1, and be sure
not to take a current exceeding the
specified amperage.
Be sure that the total wattage of all
appliances dose not exceed the rated
output of the generator.
PILOT LAMP
ON
OFF
(d) Turn the no-fuse breaker to the posi-
tion "ON".