Filter
Top Products
13
ENGLISHFRANÇAISEESPAÑOL
*Note: 1. Initial oil change should be performed after first twenty (20) hours of operation. Thereafter
change oil every hundred (100) hours.
Before changing oil, check for a suitable way to dispose of old oil.
Do not pour it down into sewage drains, onto garden soil or into open streams. Your local zoning
or environmental regulations will give you more detailed instructions on proper disposal.
*Note: 2. As to the procedures for these items, please refer to the SERVICE MANUAL or consult your
nearest Makita service dealer.
Maintenance Items
Every
1000
hours
Every
500
hours
Every
200 hours
(Monthly)
Every
50 hours
(Weekly)
Every
8 hours
(Daily)
Clean generator and check bolt and nuts
(Daily)
(Daily)
(Yearly)
(Daily)
(Daily)
Check and refill engine oil
Change engine oil (*Note1)
Clean spark plug
Clean air cleaner
Replace air cleaner element
Clean fuel filter
Remove carbon from cylinder head (*Note 2)
Check and adjust valve clearance (*Note 2)
Clean and adjust carburetor (*Note 2)
Replace fuel lines
Overhaul engine (*Note 2)
Clean spark arrester
Check AC receptacles
Clean and adjust spark plug and electrodes
Replace spark plug
Check engine switch
Check DC termianl
Check rotor
Check stator
Replace engine mount
Periodic Maintenance Schedule table
(Refill daily up to upper level)
(Initial
20 hours)
(Every
100 hours)
(Every 100 hours)