Makita G12010R Portable Generator User Manual


 
8
Make sure you review each warning in order to prevent fire hazard.
Do not refill tank while engine is running or hot.
Close fuel cock before refueling with fuel.
Be careful not to admit dust, dirt, water or other foreign objects into
fuel.
Do not fill above the top of the fuel filter (marked "LEVEL") or the fuel
may overflow when it heats up later and expands.
Wipe off spilt fuel thoroughly before starting engine.
Keep open flames away.
WARNING
Continuous operation time in normal use (rated load)
G12010R Approx. 8.2 hours
BATTERY INSTALLATION
Recommended Battery
Lead-acid battery : A capacity of 12V-32A h or larger.
For the generators used in low temperature (below -5
),
12V-40A
h or larger battery is recommended.
1) Attach terminals to a lead-acid battery already charged. Mount the battery onto
the position as specified below, with its terminals facing inward.
2) Insert each long bolt through the specified hole, its tip pointing outward.
3) Put the supporting arm on the long bolts and tighten with the butterfly nuts.
(Push the lead-acid battery all the way inward.)
4) Arrange the wiring so that it won't be damaged by possible vibration caused by
the engine.
5) Only after checking that the engine's starter key is in the "OFF" position,
securely connect the red cable, to the positive (+) terminal. And then connect
the other cable to the negative (-) terminal.
Red cable : to the (+) terminal
Black cable : to the (-) terminal