Filter
Top Products
Checking the spark plug
0
Inspection and adjustment procedure
:
-
Open spark plug cover.
-Remove plug cap and remove spark plug using a
plug wrench.
-Using plug cleaner or wire brush, clean plug elec-
trode of burnt or deposited carbon.
-
Check for proper gap between electrodes. Adjust
gap to
0.6
to
0.7
mm
(0.02
to
0.03
in) by bending the
side electrode if necessary.
(make
:
NGK).
-
Recommended replacement plug type
:
BR6HS
AL
0.6-0.7
mm
(0.02-0.03
in)
Spark arrester cleaning
0
Inspect the spark arrester every
50
hours for carbon
deposit or damage.
Clean or replace if necessary.
1.
Make sure that the muffler is cool before working.
2.
Remove the spark arrester and inspect.
3.
Use a wooden scraper or small wire bursh to scrape
away any dirt or carbon deposits from exhaust outlet
opening and spark arrester screen.
4.
Reinstall spark arrester screen.
Cleaning fuel strainer
0
Check for water or contaminants in the fuel strainer.
0
To
remove contaminants, close fuel cock and re-
move strainer cup.
0
After removing contaminants and water, wash the
cup and strainer with gasoline, Reinstall securely to
prevent leakage.
~iug
cover
7.
I
Spark arrester
I
I-
\
-
16
-