Filter
Top Products
5.
OPERATING PROCEDURES
Starting
-
Check oil and fuel levels.
-
Make sure the appliance is disconnected.
-Turn engine switch to
"CHOKE"
position. (When
engine is warm or temperature is high, start engine
with the switch at "RUN" position.)
-Pull the starter handle slowly until passing the
compression point (resistance will be felt), then
return the handle to its original position and pull
swiftly.
-After starting, allow the starter handle to return to its
original position with the handle still in your hand.
NOTE
:
When engine fails to start after several
attempts, repeat the starting procedures mentioned
above with the engine switch placed at "RUN" position.
-
After
20
to
30
seconds
of
warm-up is completed, turn
the engine switch to "RUN" position.
-9-