Makita DCS 7901 Chainsaw User Manual


 
General Safety Precautions
The use of any chain saw may be hazardous. At full
throttle chain speed can reach
45
mph (20
m/s).
It
is
important that you read; fully understand and observe
the following safety precautions and warnings. Read
the Owner's Manual and the safety instructions
periodically.
WARNING
!
Reactive forces, including kickback, can be dan-
gerous. Careless or improper use of any chain saw
may cause serious or fatal injury.
Have your MAKlTAdealer show you how
to
operate
your chain saw. Observe all applicable local safety
regulations, standards and ordinances.
WARN IN
GI
Minors should never be allowed
to
use a chain
saw.
Bystanders, especially children and animals should
not be allowed in the area where a chain saw is in
use (fig.
1).
Never let the saw run unattended.
Store it in a locked place away from children. Fill
the fuel tank
to
7/8
th
full (see storing the saw).
Do
not lend your chain saw without this Owner's
and Safety Manual. Be sure that anyone using
your saw understands the information given.
Proper use
of
a chain saw involves
1.
the operator
2.
the saw
3.
the use of the saw.
Discription of
symbols
used on chain
saws:
ANSI
B175.1-2000
Compliance with
ANSI -Standards
max.cm4p Maximum Computed Kickback Angle
(CKA)*
without
using
the
chain
brake
when
1
using the recommended bar and chain
combinations
(In
this
example
the
CKA
is
45").
max.
cw4w
Maxim u
m
Com
pu
ted Kickback Angle
(CKA)* with using the chain brake when
1
using the recommended bar and chain
combinations (In this example the
CKA
is
40").
Contact of the guide bar tip with
any object should be avoided!
Tip contact may cause the guide
bar to move suddenly upward
and backward, which may cause
serious injury!
H
LiI
Always use two hands when
operating the chain saw!
Reduced Kickback Bar and
Chain combination that has been
evaluated with the power head
to achieve kickback orotection
~~.~.ZZZ-~
(according
to
ANSI 'and CSA
st
a ndards) .
The Computed Kickback Angle is a calculated value
from energies measured on a test bench.lt is
not
the
angle of the guide bar moved upward in case of a
KICKBACK.
The operator
Physical Condition
You must be in good physical condition and mental
health and not under the influence of any substance
(drugs, alcohol), which might impair vision, dexterity
or judgment.
2
WARNING
!
Prolonged use of chain saws exposing the operator
to
vibrations may produce Whitefinger disease
(Raynaud's phenomenon). This phenomenon
reduces the hand's ability
to
feel and regulate
temperature, produces numbness and burning
sensations and may cause nerve and circulation
damage and tissue necrosis.
All MAKITA saws are therefore provided with an
antivibration system which is essential for those
using chain saws on a regular or sustained basis.
Antivibration systems do
not
guarantee that you will
not sustain Whitefinger disesase, however, they
reduce this danger considerably. Nevertheless,
continual and regular users should observe their
hands and fingers and in case of any abnormal
symptoms, seek medical advice immediately.
5