Filter
Top Products
P 3/ 5
Repair
[2] DISASSEMBLY/ASSEMBLY
[2]-1. Fan, Armature (cont.)
Take the disassembling step in reverse.
Note: 1) Do not forget to set Flat washer 5 and Flat washer 8 in place. (Fig. 3)
2) Fit two notches of Yoke unit to two protrusions on Housing set (L). (Fig. 4)
3) Before assembling Housing set (R), mount Hanger on Housing set (L) and (R). (Fig. 2)
Fig. 4
ASSEMBLING
two notches
of Yoke unit
two protrusions of Housing set (L)
Fan 95
[2]-2. Switch unit
DISASSEMBLING
ASSEMBLING
Fig. 5
(1) Remove Housing set (R) from Housing set (L). (Figs. 1 and 2)
It is not necessary to remove Motor section.
(2) Remove Switch unit by disconnect Connectores as illustrated in Fig. 5.
Take the disassembling step in reverse.
Housing set (L)
Connector of Switch unit
Connector of Controller
Controller
Switch unit