Filter
Top Products
Templet
guide
The templet guide provides
a
sleeve
through
which the bit passes, allowing use of the
trimmer with templet patterns.
Remove the chip deflector. Loosen the
screws and remove the base protector.
Place the templet guide on the base and re-
place the base protector. Then secure the
base protector by tightening the screws.
Secure the templet to the workpiece. Place
the tool on
the
templet and move the tool
with the templet guide sliding along the
side of the templet.
Base
Drotector
1
Straight bit
4
I
Templet guide
10
Distance
(X)
Workpiece
10
mm
lL
(25/64")
NOTE
:
The workpiece will be cut
a
slightly different
size
from the templet.
Allow
for the dis-
tance
(X)
between the router bit and the outside of the templet guide. The distance
(X)
can be calculated by using the following equation
:
Distance
(X)
=
outside diameter of the templet guide
-
router bit diameter
2
10