Filter
Top Products
ADDITIONAL
SAFETY
RULES
1.
Wear hearing protection during extended periods of operation.
2.
Handle the bits very carefully.
3.
Check the bit carefully for cracks or damage before operation.
4.
Avoid cutting nails. Inspect for and remove all nails from the workpiece before
5.
Hold the tool firmly.
6.
Keep hands away from rotating parts.
7.
Make sure the
bit
is not contacting the workpiece before the switch is turned
8.
Before using the tool on an actual workpiece, let
it
run
for a while.
9.
Be careful of the
bit
rotating direction and the feed direction.
Replace cracked or damaged
bit
immediately.
operation.
on.
Watch for vibration or wobbling that could indicate improperly installed
bit.
IO.
Do not leave the tool running. Operate the tool only when hand-held.
11.
Always switch off and wait for the bit to come to a complete stop before
12.
Do not tcuch the bit immediately after operation;
it
may be extremely hot
13.
Don’t smear the tool base carelessly with thinner, gasoline, oil or the like.
removing the tool from workpiece.
and could burn your skin.
They may cause cracks
in
the tool base.
SAVE THESE INSTRUCTIONS.
4