Filter
Top Products
English Manual
5.7 Windows
®
XP Driver Installation
Follow the steps below to install Windows
®
XP driver:
5.7.1 Power on your computer and make sure that the USB port is enabled and
working properly.
5.7.2 Insert the driver of USB-Serial adapter into CD-ROM drive and plug in the
USB-Serial adapter into the USB port, the “Found New Hardware
Wizard” will to assist you to setting up the new device.
5.7.3 Select the “Install the software automatically (Recommended)” then
click “Next” to continue.
5.7.4 The windows will auto detect the device (prolific USB-to-Serial Comm
Port) and install the driver into your system.
5.7.5 As the windows appear as below, click the “Finish” to continue.