Filter
Top Products
English Manual
5.5 Windows
®
2000 Driver Installation
Follow the steps below to install Windows
®
2000 driver:
5.5.1 Power on your computer and make sure that the USB port is enabled and
working properly.
5.5.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and
Plug in the USB-Serial adapter into the USB port, Windows will run the
Found New Hardware Wizard to assist you in setting up the new device.
Click “Next” to continue.
5.5.3 Select Search for a suitable driver for my device (recommend) and click
“NEXT” to continue.
5.5.4 Select the “Specify a location” drive and click “NEXT” to continue.