Filter
Top Products
5. USING MENU
5.1 CODING
Pressing the CODING key in the MENU group enters setting screen.
Figure 5-1 Coding screen
This screen is used to select the modulation mode and TS signal, and to set items related
to channel coding.
To exit settings, press other key in the MENU, or hold down the UP MENU key to return to
the top screen (status display).
• Source (F1) Selects the input source. (Refer to Section 5.1.1.)
• Modulation (F2) Selects the broadcasting sy52245927o(dulation mod).