Filter
Top Products
4.3 Menu
The top screen only displays the current setting status; there is no setting items.
When changing the setting status, press the MENU key to display the setting screen.
The MENU key function is listed below:
CODING Selects the broadcasting system and modulation mode.
Selects the TS input source.
Sets the Interleave.
Selects the CW on/off.
(Refer to Section 5.1.)
NOISE Sets the CN level value.
Sets the CN addition on/off.
(Refer to Section 5.2.)
CHANNEL Sets the RF output channel (or RF frequency).
(Refer to Section 5.3.)
LEVEL Sets the output level.
(Refer to Section 5.4.)
BER Controls the BER measurement function.
Sets the threshold level for GO/NO-GO judgement.
(Refer to Section 5.5.)
UTILITY Sets the various setting
(Refer to Section 5.6.)
＊ To return to the top menu, hold down the UP MENU key for at least one second.
4-6