Filter
Top Products
3.2 Rear Panel
○
22
○
24
○
33
○
34
○
27
○
31
○
32
○
26
○
31
○
39
○
23
○
25
○
28
○
29
○
30
○
35
○
36
○
37
○
38
Figure 3-2 LG 3803 rear panel
○
22 FREQ STD 10 MHz INPUT connector
Accepts the external reference signal. Apply 10 MHz reference signal when operating
this instrument in synchronized with the equipment connected.
○
23 FREQ STD 10 MHz OUTPUT connector
Synchronizes other equipment.
○
24 Serial BER CLOCK signal input connector (BER SERIAL INPUT CLOCK)
Used for BER measurement in serial connection.
○
25 Serial BER SYNC signal input connector (BER SERIAL INPUT SYNC)
Used for BER measurement in serial connection.
＊This connector is only used when the "Serial (4 Wire)" is selected on the screen.
○
26 Serial BER DATA signal input connector (BER SERIAL INPUT DATA)
Used for BER measurement in serial connection.
○
27 Serial BER VALID signal input connector (BER SERIAL INPUT VALID)
Used for BER measurement in serial connection.
＊This connector is only used when the "Serial (4 Wire)" is selected on the screen.
○
28 TS clock output connector
Outputs the TS clock to synchronize the external TS input.
○
29 TS INPUT DVB-ASI connector
Accepts the external TS signal. Apply the TS in DVB-ASI format.
○
30 TS INPUT DVB-SPI connector
Accepts the external TS signal. Apply the TS in DVB-SPI format.
3-4