Filter
Top Products
32
Section 5: Specifications & Capacities
ZR44 & ZR52 (S/N 472619 and below) Zero Turning Radius Mowers Riding Mowers 356-059M 7/16/07
Land Pride
Table of Contents
Ground Speed
Forward: 0-7 MPH
Reverse: 0-5 MPH
Steering Type
Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls
Speed, forward, reverse, brake, and turns.
Steering Turning Radius
True zero degree. Turns within its own length with counter-rotating
independent drive wheels
Brake Service
Hydrostatic dynamic braking
Parking
Automotive-style drum brakes.
Integral park brakes are automatically engaged when steering levers are
placed in neutral.
Mower Drive
Single V-belt with electric clutch and spring tension idler pulley
Safety Features
Operator presence system connected to deck and drive clutches.
Stabilizer rollers rear of tractor.
Seat
Molded-vinyl seat. Bolt loosening required for forward and reverse
adjustments.
Optional armrests kit for standard molded-vinyl seat.
Optional deluxe cushion seat with arm rests.
Mainframe Construction
1 1/2" square solid steel.
Drive Motor Mount
1/8” welded steel
Front Caster Wheels
Mounted with roller bearings on each wheel.
Front Caster Forks
3/8” steel.
Deck Thickness
11 Gauge decks with reinforcements welded into spindle mount areas
Box-Section Reinforced Front Edge
14 GA. x 1 1/4” Bar
Deck Trim Edges
Solid 1” x 3/8” steel bars for reinforced impact area
Deck Housing Depth
4 1/8” deep, (room for high-capacity mowing)
Deck Lift
Foot-operated deck height adjustment.
Pin for setting height and transport position.
Hand Operated Controls
Choke, throttle, ignition switch, electric mower clutch and Integrated parking
brakes.
Indicators
Engine warning light.
Optional hour meter through parts only
Cup Holder
Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size including Big Gulp.
Cutting Heights
Foot-operated deck height adjustment. Pin for setting height, transport
position. Height adjustment in 1/4" increments from 1 1/2” to 4 1/2”
Mowing Blades
Heavy-duty, heat-treated, high-lift steel blades
.20" x 2 1/2" x 15.7" .20 x 2 1/2” x 18.3”
Blade Tip Speed
14,666 FPM 16,727 FPM
Blade Drive
V-belt drive to all three spindles. Spring tension idler pulleys.
Spindles
Machine ductile housing, 1" diameter high carbon steel shafts and sealed ball
bearings.
Flotation
Free-floating mower using three blades with center blade to the front.
Mower is suspended at the four corners on spring-assisted chains.
Includes 4 anti-scalp wheels to improve flotation in rolling and uneven terrain.
ZR44 & ZR52 Accu-Z Razor Residential Riding Mower (General Specifications)
ZR44 ZR52